Make your own free website on Tripod.com

The Laser & Waterjet Cutting Revolution.

Waterjet Cutting

Home | Company Info | BizSAFE | Laser Cutting | Waterjet Cutting | Other Services | Products | Contact Us

Acknowledge the Power of Water.

wj.jpg

Richinn Technology utilizes a waterjet system with Active Tolerance Control produces more accurate parts at significantly higher cutting speeds than parts cut with a conventional waterjet.
 
Stream lag and taper are natural, but undesirable result of cutting with conventional waterjet. The faster parts are cut, the greater the stream lag. Stream lag causes part geometry errors. In addition, as cut speed is increased through a given material, the waterjet beam produces ever-increasing taper. Conventional waterjets must slow down in order to reduce or eliminate finished part tolerance errors caused by stream lag and taper.
 
With Active Tolerance Control, these limitation are overcome.

       Conventional
    Waterjet Cutting

lado2_edited.jpg

ferro2_edited.jpg

bici2_edited.jpg

           Active
  Tolerance Control

lado1_edited.jpg

ferro_edited.jpg

bici1_edited.jpg

Materials that we can cut are quite limitless, examples;
 
Steel, Stainless Steel, Aluminium, Copper, Brass, Titanium, Inconel, Nickel Alloys, Hastalloy, Marble, Stones, Granites, Glass, Quantz and Plastics.

With the cutting area of 6 metre X 3 metre, we are able to process materials that are readily available in the industry.